VK Vinylester Styrene Free Resin 420ml

The VK mortar is a 2-component injection resin mortar based on a vinylester resin styrene-free and will be delivered in a co-axial cartridge system.

• for anchors in concrete and masonry
• also for post-installed rebar connections
• also suitable for hollow bricks
• fast curing
• installation temperatures up to -10°C

This high performance product may be used in combination with a hand-, battery- or pneumatic tool and a static mixer. It was designed especially for the anchoring of threaded rods, reinforcing bars or internal threaded rod
sleeves into concrete (also porous and light) as well as masonry. Based on the excellent standing behaviour the usability in combination with a special plastic sleeve in hollow material is given.

The VK mortar product is characterised, by a huge range of applications with an installation temperature from -10°C ("Standard" version) and an application temperature up to 120°C as well as by high chemical resistance for applications in extreme ambiences e.g. in swimming pools (chlorine) or in closeness to the sea (salt). The wide range of certificates, national and international approvals, allows nearly every application.

Properties and benefits

• European Technical Assessment for bonded fasteners acc. to EAD 330499-01-0601 (Option 1, Seismic C1 and C2): ETA-08/0237
• European Technical Assessment for injection anchors for use in masonry acc. to EAD 330076-00-0604: ETA-20/0557
• European Technical Assessment for post-installed rebar acc. to. EAD 330087-00-0601: ETA-09/0277
• US-approval acc. to AC 308 in concrete (ICC-ES): ESR-2539
• ASTM C881
• Certificated for drinking water applications acc. to NSF Standard 61
• Fire resistance test report: EBB 170019_1
• For heavy anchoring - doweling and post-installed rebar connection
• Overhead application; waterfilled bore holes
• Suitable for attachment points with small edge- and axial distances due to an anchoring free of expansion forces
• High chemical resistance
• Low odour
• High bending and pressure strength
• Cartridge can be reused up to the end of the shelf life by replacing the static mixer or resealing cartridge with the sealing cap
• Environmental Product Declaration - EPD-CHE-20220143-CAA4-EN

VK resin injection mortar can be modelled using Chemofast DesignFix anchor software, please contact VJT technical department for further assistance [email protected] or 01233 652520