Anchor Software Design – DesignFiX
DesignFiX is the Chemical Anchor and Post Installed Rebar Calculation Software designed to meet EN 1992-4:2018 Eurocode 2 - Design of concrete structures part 4, for the range of Injection Resins from VJ Technology. DesignFiX enables calculations to be made while providing a list of suitable products, from which you can choose the most appropriate for your application.
Click here to download the latest version of our DesignFiX Anchor Calculation Software or contact our Technical Department for training and further information.
As you enter information, live calculations change accordingly displaying product optimisation (design life of 50-100 years). Embedment depths are easily adjusted via a drop down menu whilst a series of tabs along the top allow you to quickly make the amendments to geometry, properties and loads required.
As you enter information, live calculations change accordingly next to each product. Embedments depths are easily adjusted via a drop down menu whilst a series of tabs along the the top allow you to quickly make the amendments to geometry, properties and loads required.
The graphic input tab shows an image of your fixing application. You can adjust load directions and numeric factors on this page, and the image can be rotated, which may provide a better view of the application.
The calculation tab offers a print preview option which produces a results report. Anchors loads and potential modes of failure are detailed.