Item No. 06000010
E410+® is VJT's high performance standard cure epoxy acrylate injection mortar with approvals for non-cracked concrete and masonry substrates. This product is used in conjunction with a hand, battery or pneumatic tool and static mixer nozzle.
E410+® consists of 2 components, resin and hardener, which are stored in separate compartments in a coaxial cartridge. These are mixed when extruded through the mixer nozzle and allow the mortar to set. Cartridges may be reused up to end of shelf life by replacing the static mixer nozzle or resealing the cap.
Designed for the anchoring of threaded rods and internal threaded rod sleeves for approved applications. Using a sieve sleeve, an easy and save application for hollow bricks/blocks.
Usage/Purpose
E410+® is suitable for anchoring of facades, roofs, timber construction, metal profiles, consoles, railings, sanitary devices, cable trays, piping, fixing to masonry and more Key Benefits
• UKTA and ETA for non-cracked concrete, C20/25 to C50/60
• UKTA and ETA for use in masonry applications
• Suitable for dry and wet concrete
• Suitable for overhead application
• High chemical resistance
• Low odour
• Small allowable edge distance and anchor spacing
• Design check can be performed using free to download VJT DesignFiX software - alternatively contact [email protected] to model applications
E410+ spare mixer nozzles - 06100070
