Click to zoom
Item No. 18200120
This product is suitable for all general applications. The washer is through hardened to make sure it is harder than the bolt and contact surface. It is treated with Delta Protekt®, a surface coating that provides a very high corrosion protection. Nord-Lock washers work with all common bolt grades such as 4.8, 5.6, 8.8, 10.9 and 12.9.
Nord-Lock steel washers are suitable for any general steel application
Steel Type: EN 1.7182
Available sizes with normal outer diameter: M3 - M42 (metric) and #5 - 1 1/2” (inches)*
Available sizes with enlarged outer diameter: M3.5 - M36 (metric) and #6 - 1 3/8” (inches)*
Surface coating: Zink flake coating, Delta Protekt®
Washer hardness: ≥ 465 HV1**
Corrosion resistance: Minimum 1000 hours in salt spray test (according to IS09227)
Temperature range: -50°C to 200°C
All washers are laser marked with brand name, control number and type code for increased traceability down to the raw material in the factory.
This product is suitable for all general applications. The washer is through hardened to make sure it is harder than the bolt and contact surface. It is treated with Delta Protekt®, a surface coating that provides a very high corrosion protection. Nord-Lock washers work with all common bolt grades such as 4.8, 5.6, 8.8, 10.9 and 12.9.
Nord-Lock steel washers are suitable for any general steel application
Steel Type: EN 1.7182
Available sizes with normal outer diameter: M3 - M42 (metric) and #5 - 1 1/2” (inches)*
Available sizes with enlarged outer diameter: M3.5 - M36 (metric) and #6 - 1 3/8” (inches)*
Surface coating: Zink flake coating, Delta Protekt®
Washer hardness: ≥ 465 HV1**
Corrosion resistance: Minimum 1000 hours in salt spray test (according to IS09227)
Temperature range: -50°C to 200°C
All washers are laser marked with brand name, control number and type code for increased traceability down to the raw material in the factory.
This product is suitable for all general applications. The washer is through hardened to make sure it is harder than the bolt and contact surface. It is treated with Delta Protekt®, a surface coating that provides a very high corrosion protection. Nord-Lock washers work with all common bolt grades such as 4.8, 5.6, 8.8, 10.9 and 12.9.
Nord-Lock steel washers are suitable for any general steel application
Steel Type: EN 1.7182
Available sizes with normal outer diameter: M3 - M42 (metric) and #5 - 1 1/2” (inches)*
Available sizes with enlarged outer diameter: M3.5 - M36 (metric) and #6 - 1 3/8” (inches)*
Surface coating: Zink flake coating, Delta Protekt®
Washer hardness: ≥ 465 HV1**
Corrosion resistance: Minimum 1000 hours in salt spray test (according to IS09227)
Temperature range: -50°C to 200°C
All washers are laser marked with brand name, control number and type code for increased traceability down to the raw material in the factory.
This product is suitable for all general applications. The washer is through hardened to make sure it is harder than the bolt and contact surface. It is treated with Delta Protekt®, a surface coating that provides a very high corrosion protection. Nord-Lock washers work with all common bolt grades such as 4.8, 5.6, 8.8, 10.9 and 12.9.
Nord-Lock steel washers are suitable for any general steel application
Steel Type: EN 1.7182
Available sizes with normal outer diameter: M3 - M42 (metric) and #5 - 1 1/2” (inches)*
Available sizes with enlarged outer diameter: M3.5 - M36 (metric) and #6 - 1 3/8” (inches)*
Surface coating: Zink flake coating, Delta Protekt®
Washer hardness: ≥ 465 HV1**
Corrosion resistance: Minimum 1000 hours in salt spray test (according to IS09227)
Temperature range: -50°C to 200°C
All washers are laser marked with brand name, control number and type code for increased traceability down to the raw material in the factory.
This product is suitable for all general applications. The washer is through hardened to make sure it is harder than the bolt and contact surface. It is treated with Delta Protekt®, a surface coating that provides a very high corrosion protection. Nord-Lock washers work with all common bolt grades such as 4.8, 5.6, 8.8, 10.9 and 12.9.
Nord-Lock steel washers are suitable for any general steel application
Steel Type: EN 1.7182
Available sizes with normal outer diameter: M3 - M42 (metric) and #5 - 1 1/2” (inches)*
Available sizes with enlarged outer diameter: M3.5 - M36 (metric) and #6 - 1 3/8” (inches)*
Surface coating: Zink flake coating, Delta Protekt®
Washer hardness: ≥ 465 HV1**
Corrosion resistance: Minimum 1000 hours in salt spray test (according to IS09227)
Temperature range: -50°C to 200°C
All washers are laser marked with brand name, control number and type code for increased traceability down to the raw material in the factory.
We use cookies to remember your settings, personalise content, improve website performance, analyse traffic and assist with our general marketing efforts. Learn more
Cookies are small text files that can be used by websites to improve your experience and to remember settings. The law requires that your consent is given for any cookies that are not strictly necessary for the operation of this website.
Necessary cookies are cookies that are required for the operation of this website.
Other cookies not strictly necessary for the operation of this website
Selecting this option will allow us to use cookies for marketing and analytics purposes. For example Google Analytics.
