Click to zoom
Item No. 04710240
Description
Due to its high performance as well as its easy and quick installation, the wedge anchor BZ plus with European Technical Assessment for cracked concrete can be used for a wide variety of applications. The long thread length and two approved anchorage depths allow the BZ plus wedge anchor greater flexibility of use. The option for reduced anchorage depth saves time during drilling and reduces the installation effort. Using a suction drill also eliminates the need for blowing out the drilled hole.
The wedge anchors BZ plus M8–M20 are also approved for use under seismic loading C1 and C2 up to an anchor length of 210 mm. By using the new VS filling washer, the permissible seismic loads can be increased even further
Advantages
– Approved for use in cracked and non-cracked concrete (Option 1)
– Approved for seismic loads, performance categories C1 and C2 (M8 to M20, maximum anchor length 210 mm)
– Approved for use under fire exposure. Fire resistance ratings R30–R120
– Suitable for use in compression resistant natural stone (without approval)
– Two effective anchorage depths for greater flexibility (M8 to M16, maximum anchor length 210 mm)
– Anchoring with shorter effective anchorage depth reduces drilling and installation time.
– Anchoring with the standard effective anchorage depth is suitable for the highest load limits
– Particularly cost effective: the short “s” versions with only one effective anchorage depth in the sizes M8 to M16
– Suitable for surface, through, and stand-off fastening
– Suitable for sprinkler system installations complying with VdS requirements
– FM approval for the installation of sprinkler systems (M10 to M16)
– Shock approval by the Swiss Federal Office for Civil Protection
Applications
Anchoring of medium to heavy loads in cracked and non-cracked concrete: columns, steel beams, railings, cable routes, pipe routes, timber constructions, consoles, facades etc.
Due to its high performance as well as its easy and quick installation, the wedge anchor BZ plus with European Technical Assessment for cracked concrete can be used for a wide variety of applications. The long thread length and two approved anchorage depths allow the BZ plus wedge anchor greater flexibility of use. The option for reduced anchorage depth saves time during drilling and reduces the installation effort. Using a suction drill also eliminates the need for blowing out the drilled hole.
The wedge anchors BZ plus M8–M20 are also approved for use under seismic loading C1 and C2 up to an anchor length of 210 mm. By using the new VS filling washer, the permissible seismic loads can be increased even further
Product Features:
Applications
Anchoring of medium to heavy loads in cracked and non-cracked concrete: columns, steel beams, railings, cable routes, pipe routes, timber constructions, consoles, facades etc.
Due to its high performance as well as its easy and quick installation, the wedge anchor BZ plus with European Technical Assessment for cracked concrete can be used for a wide variety of applications. The long thread length and two approved anchorage depths allow the BZ plus wedge anchor greater flexibility of use. The option for reduced anchorage depth saves time during drilling and reduces the installation effort. Using a suction drill also eliminates the need for blowing out the drilled hole.
The wedge anchors BZ plus M8–M20 are also approved for use under seismic loading C1 and C2 up to an anchor length of 210 mm. By using the new VS filling washer, the permissible seismic loads can be increased even further
Product Features:
Applications
Anchoring of medium to heavy loads in cracked and non-cracked concrete: columns, steel beams, railings, cable routes, pipe routes, timber constructions, consoles, facades etc.
Due to its high performance as well as its easy and quick installation, the wedge anchor BZ plus with European Technical Assessment for cracked concrete can be used for a wide variety of applications. The long thread length and two approved anchorage depths allow the BZ plus wedge anchor greater flexibility of use. The option for reduced anchorage depth saves time during drilling and reduces the installation effort. Using a suction drill also eliminates the need for blowing out the drilled hole.
The wedge anchors BZ plus M8–M20 are also approved for use under seismic loading C1 and C2 up to an anchor length of 210 mm. By using the new VS filling washer, the permissible seismic loads can be increased even further
Product Features:
Applications
Anchoring of medium to heavy loads in cracked and non-cracked concrete: columns, steel beams, railings, cable routes, pipe routes, timber constructions, consoles, facades etc.
Description
Due to its high performance as well as its easy and quick installation, the wedge anchor BZ plus with European Technical Assessment for cracked concrete can be used for a wide variety of applications. The long thread length and two approved anchorage depths allow the BZ plus wedge anchor greater flexibility of use. The option for reduced anchorage depth saves time during drilling and reduces the installation effort. Using a suction drill also eliminates the need for blowing out the drilled hole.
The wedge anchors BZ plus M8–M20 are also approved for use under seismic loading C1 and C2 up to an anchor length of 210 mm. By using the new VS filling washer, the permissible seismic loads can be increased even further
Advantages
– Approved for use in cracked and non-cracked concrete (Option 1)
– Approved for seismic loads, performance categories C1 and C2 (M8 to M20, maximum anchor length 210 mm)
– Approved for use under fire exposure. Fire resistance ratings R30–R120
– Suitable for use in compression resistant natural stone (without approval)
– Two effective anchorage depths for greater flexibility (M8 to M16, maximum anchor length 210 mm)
– Anchoring with shorter effective anchorage depth reduces drilling and installation time.
– Anchoring with the standard effective anchorage depth is suitable for the highest load limits
– Particularly cost effective: the short “s” versions with only one effective anchorage depth in the sizes M8 to M16
– Suitable for surface, through, and stand-off fastening
– Suitable for sprinkler system installations complying with VdS requirements
– FM approval for the installation of sprinkler systems (M10 to M16)
– Shock approval by the Swiss Federal Office for Civil Protection
Applications
Anchoring of medium to heavy loads in cracked and non-cracked concrete: columns, steel beams, railings, cable routes, pipe routes, timber constructions, consoles, facades etc.
Due to its high performance as well as its easy and quick installation, the wedge anchor BZ plus with European Technical Assessment for cracked concrete can be used for a wide variety of applications. The long thread length and two approved anchorage depths allow the BZ plus wedge anchor greater flexibility of use. The option for reduced anchorage depth saves time during drilling and reduces the installation effort. Using a suction drill also eliminates the need for blowing out the drilled hole.
The wedge anchors BZ plus M8–M20 are also approved for use under seismic loading C1 and C2 up to an anchor length of 210 mm. By using the new VS filling washer, the permissible seismic loads can be increased even further
Product Features:
Applications
Anchoring of medium to heavy loads in cracked and non-cracked concrete: columns, steel beams, railings, cable routes, pipe routes, timber constructions, consoles, facades etc.
Due to its high performance as well as its easy and quick installation, the wedge anchor BZ plus with European Technical Assessment for cracked concrete can be used for a wide variety of applications. The long thread length and two approved anchorage depths allow the BZ plus wedge anchor greater flexibility of use. The option for reduced anchorage depth saves time during drilling and reduces the installation effort. Using a suction drill also eliminates the need for blowing out the drilled hole.
The wedge anchors BZ plus M8–M20 are also approved for use under seismic loading C1 and C2 up to an anchor length of 210 mm. By using the new VS filling washer, the permissible seismic loads can be increased even further
Product Features:
Applications
Anchoring of medium to heavy loads in cracked and non-cracked concrete: columns, steel beams, railings, cable routes, pipe routes, timber constructions, consoles, facades etc.
We use cookies to remember your settings, personalise content, improve website performance, analyse traffic and assist with our general marketing efforts. Learn more
Cookies are small text files that can be used by websites to improve your experience and to remember settings. The law requires that your consent is given for any cookies that are not strictly necessary for the operation of this website.
Necessary cookies are cookies that are required for the operation of this website.
Other cookies not strictly necessary for the operation of this website
Selecting this option will allow us to use cookies for marketing and analytics purposes. For example Google Analytics.
