MKT BZ Plus A4 Option 1 Throughbolt

Description

Due to its high performance as well as its easy and quick installation, the wedge anchor BZ plus A4 with European Technical Assessment for cracked concrete can be used for a wide variety of applications. The long thread length and two approved anchorage depths allow the BZ plus A4 wedge anchor greater flexibility of use. The option for reduced anchorage depth saves time during drilling and reduces the installation effort. Using a suction drill also eliminates the need for blowing out the drilled hole.

The wedge anchors BZ plus A4 M8–M20 are also approved for use under seismic loading C1 and C2 up to an anchor length of 210 mm. By using the new VS filling washer, the permissible seismic loads can be increased even further

Advantages

–     Approved for use in cracked and non-cracked concrete (Option 1)

–     Approved for seismic loads, performance categories C1 and C2 (M8 to M20, maximum anchor length 210 mm)

–     Approved for use under fire exposure. Fire resistance ratings R30–R120

–     Suitable for use in compression resistant natural stone (without approval)

–     Two effective anchorage depths for greater flexibility (M8 to M16, maximum anchor length 210 mm)

–     Anchoring with shorter effective anchorage depth reduces drilling and installation time.

–     Anchoring with the standard effective anchorage depth is suitable for the highest load limits

–     Particularly cost effective: the short “s” versions with only one effective anchorage depth in the sizes M8 to M16

–     Suitable for surface, through, and stand-off fastening

–     Suitable for sprinkler system installations complying with VdS requirements

–     FM approval for the installation of sprinkler systems (M10 to M16)

–     Shock approval by the Swiss Federal Office for Civil Protection

Applications

Medium to heavy duty anchorage in cracked and non-cracked concrete: Supports, steel beams, facade substructures, railing fixings, gates, pipe trays, wooden structures, brackets, stadium seating, fastenings in earthquake zones, etc.

Description

Due to its high performance as well as its easy and quick installation, the wedge anchor BZ plus A4 with European Technical Assessment for cracked concrete can be used for a wide variety of applications. The long thread length and two approved anchorage depths allow the BZ plus A4 wedge anchor greater flexibility of use. The option for reduced anchorage depth saves time during drilling and reduces the installation effort. Using a suction drill also eliminates the need for blowing out the drilled hole.

The wedge anchors BZ plus A4 M8–M20 are also approved for use under seismic loading C1 and C2 up to an anchor length of 210 mm. By using the new VS filling washer, the permissible seismic loads can be increased even further

Advantages

–     Approved for use in cracked and non-cracked concrete (Option 1)

–     Approved for seismic loads, performance categories C1 and C2 (M8 to M20, maximum anchor length 210 mm)

–     Approved for use under fire exposure. Fire resistance ratings R30–R120

–     Suitable for use in compression resistant natural stone (without approval)

–     Two effective anchorage depths for greater flexibility (M8 to M16, maximum anchor length 210 mm)

–     Anchoring with shorter effective anchorage depth reduces drilling and installation time.

–     Anchoring with the standard effective anchorage depth is suitable for the highest load limits

–     Particularly cost effective: the short “s” versions with only one effective anchorage depth in the sizes M8 to M16

–     Suitable for surface, through, and stand-off fastening

–     Suitable for sprinkler system installations complying with VdS requirements

–     FM approval for the installation of sprinkler systems (M10 to M16)

–     Shock approval by the Swiss Federal Office for Civil Protection

Applications

Medium to heavy duty anchorage in cracked and non-cracked concrete: Supports, steel beams, facade substructures, railing fixings, gates, pipe trays, wooden structures, brackets, stadium seating, fastenings in earthquake zones, etc.

Description

Due to its high performance as well as its easy and quick installation, the wedge anchor BZ plus A4 with European Technical Assessment for cracked concrete can be used for a wide variety of applications. The long thread length and two approved anchorage depths allow the BZ plus A4 wedge anchor greater flexibility of use. The option for reduced anchorage depth saves time during drilling and reduces the installation effort. Using a suction drill also eliminates the need for blowing out the drilled hole.

The wedge anchors BZ plus A4 M8–M20 are also approved for use under seismic loading C1 and C2 up to an anchor length of 210 mm. By using the new VS filling washer, the permissible seismic loads can be increased even further

Advantages

–     Approved for use in cracked and non-cracked concrete (Option 1)

–     Approved for seismic loads, performance categories C1 and C2 (M8 to M20, maximum anchor length 210 mm)

–     Approved for use under fire exposure. Fire resistance ratings R30–R120

–     Suitable for use in compression resistant natural stone (without approval)

–     Two effective anchorage depths for greater flexibility (M8 to M16, maximum anchor length 210 mm)

–     Anchoring with shorter effective anchorage depth reduces drilling and installation time.

–     Anchoring with the standard effective anchorage depth is suitable for the highest load limits

–     Particularly cost effective: the short “s” versions with only one effective anchorage depth in the sizes M8 to M16

–     Suitable for surface, through, and stand-off fastening

–     Suitable for sprinkler system installations complying with VdS requirements

–     FM approval for the installation of sprinkler systems (M10 to M16)

–     Shock approval by the Swiss Federal Office for Civil Protection

Applications

Medium to heavy duty anchorage in cracked and non-cracked concrete: Supports, steel beams, facade substructures, railing fixings, gates, pipe trays, wooden structures, brackets, stadium seating, fastenings in earthquake zones, etc.

Description

Due to its high performance as well as its easy and quick installation, the wedge anchor BZ plus A4 with European Technical Assessment for cracked concrete can be used for a wide variety of applications. The long thread length and two approved anchorage depths allow the BZ plus A4 wedge anchor greater flexibility of use. The option for reduced anchorage depth saves time during drilling and reduces the installation effort. Using a suction drill also eliminates the need for blowing out the drilled hole.

The wedge anchors BZ plus A4 M8–M20 are also approved for use under seismic loading C1 and C2 up to an anchor length of 210 mm. By using the new VS filling washer, the permissible seismic loads can be increased even further

Advantages

–     Approved for use in cracked and non-cracked concrete (Option 1)

–     Approved for seismic loads, performance categories C1 and C2 (M8 to M20, maximum anchor length 210 mm)

–     Approved for use under fire exposure. Fire resistance ratings R30–R120

–     Suitable for use in compression resistant natural stone (without approval)

–     Two effective anchorage depths for greater flexibility (M8 to M16, maximum anchor length 210 mm)

–     Anchoring with shorter effective anchorage depth reduces drilling and installation time.

–     Anchoring with the standard effective anchorage depth is suitable for the highest load limits

–     Particularly cost effective: the short “s” versions with only one effective anchorage depth in the sizes M8 to M16

–     Suitable for surface, through, and stand-off fastening

–     Suitable for sprinkler system installations complying with VdS requirements

–     FM approval for the installation of sprinkler systems (M10 to M16)

–     Shock approval by the Swiss Federal Office for Civil Protection

Applications

Medium to heavy duty anchorage in cracked and non-cracked concrete: Supports, steel beams, facade substructures, railing fixings, gates, pipe trays, wooden structures, brackets, stadium seating, fastenings in earthquake zones, etc.

Description

Due to its high performance as well as its easy and quick installation, the wedge anchor BZ plus A4 with European Technical Assessment for cracked concrete can be used for a wide variety of applications. The long thread length and two approved anchorage depths allow the BZ plus A4 wedge anchor greater flexibility of use. The option for reduced anchorage depth saves time during drilling and reduces the installation effort. Using a suction drill also eliminates the need for blowing out the drilled hole.

The wedge anchors BZ plus A4 M8–M20 are also approved for use under seismic loading C1 and C2 up to an anchor length of 210 mm. By using the new VS filling washer, the permissible seismic loads can be increased even further

Advantages

–     Approved for use in cracked and non-cracked concrete (Option 1)

–     Approved for seismic loads, performance categories C1 and C2 (M8 to M20, maximum anchor length 210 mm)

–     Approved for use under fire exposure. Fire resistance ratings R30–R120

–     Suitable for use in compression resistant natural stone (without approval)

–     Two effective anchorage depths for greater flexibility (M8 to M16, maximum anchor length 210 mm)

–     Anchoring with shorter effective anchorage depth reduces drilling and installation time.

–     Anchoring with the standard effective anchorage depth is suitable for the highest load limits

–     Particularly cost effective: the short “s” versions with only one effective anchorage depth in the sizes M8 to M16

–     Suitable for surface, through, and stand-off fastening

–     Suitable for sprinkler system installations complying with VdS requirements

–     FM approval for the installation of sprinkler systems (M10 to M16)

–     Shock approval by the Swiss Federal Office for Civil Protection

Applications

Medium to heavy duty anchorage in cracked and non-cracked concrete: Supports, steel beams, facade substructures, railing fixings, gates, pipe trays, wooden structures, brackets, stadium seating, fastenings in earthquake zones, etc.