ITW Spit CFC Low Profile Self-drill Screw

CFC26 5.5 x 25 and CFC16 4.8 x 16 Low Profile Self-drill Screw for Fixing to Mild Steel Profiles

Applications

• Steel framing systems
• Fixing steel to steel
• Bracketry to steel
• Composite steel decking
• General metal construction

Installation Guidelines

• A standard screwgun with a depth sensitive nosepiece should be used to install self-drill screws. For optimal fastener performance, the screwgun should be a minimum of 6 amps and have an RPM range of 0-2,500.
• Adjust the screwgun nosepiece to properly seat the fastener.
• The fastener is fully seated when the head is flush with the work surface.
• Overdriving may result in torsional failure of the fastener or stripout of the substrate
• The fastener must penetrate beyond the metal structure a minimum of 3 pitches of thread
• New magnetic sockets must be correctly set before use. Remove chip build-up as needed.
• Drive unit VJT order code 13601200 - 2PSD (921100)

Climaseal Coating

Climaseal is a high quality metal filled thermoset coating. Climaseal has been uniquely formulated to react and form a complete long life protection to provide the optimum in corrosion resistance properties. Climaseal is self sacrificing to the base substrate if penetrated of damaged. Fasteners coated with Climaseal exhibit excellent resistance most forms of abrasion and torque. 

CFC26 5.5 x 25 and CFC16 4.8 x 16 Low Profile Self-drill Screw for Fixing to Mild Steel Profiles

Applications

• Steel framing systems
• Fixing steel to steel
• Bracketry to steel
• Composite steel decking
• General metal construction

Installation Guidelines

• A standard screwgun with a depth sensitive nosepiece should be used to install self-drill screws. For optimal fastener performance, the screwgun should be a minimum of 6 amps and have an RPM range of 0-2,500.
• Adjust the screwgun nosepiece to properly seat the fastener.
• The fastener is fully seated when the head is flush with the work surface.
• Overdriving may result in torsional failure of the fastener or stripout of the substrate
• The fastener must penetrate beyond the metal structure a minimum of 3 pitches of thread
• New magnetic sockets must be correctly set before use. Remove chip build-up as needed.
• Drive unit VJT order code 13601200 - 2PSD (921100)

Climaseal Coating

Climaseal is a high quality metal filled thermoset coating. Climaseal has been uniquely formulated to react and form a complete long life protection to provide the optimum in corrosion resistance properties. Climaseal is self sacrificing to the base substrate if penetrated of damaged. Fasteners coated with Climaseal exhibit excellent resistance most forms of abrasion and torque.