Illbruck Green Glass Protection Film 600mm x 250mtr AW400

Product Description

AW400 Glass Protection Film is a self adhesive polyethylene film with acrylic adhesive suitable for application to glass & other surfaces requiring temporary protection against damage during processing & storage.

Usage/purpose
AW400 Glass Protection Film is a selfadhesive film suitable for application to glass and other surfaces requiring temporary protection against damage during processing and storage or resulting from other trades activity once installed. The film can be applied to glass, rough painted metals and rough plastic surfaces. The film must be removed and potentially replaced at a maximum 6 months* following application due to potential UV degradation causing difficult removal and potential damage to the glazing.

* Note: If the product has been applied during late spring and summer then it is advised that the film be
replaced every 3 months, as exposure during this time could make subsequent removal difficult due to high UV conditions.

The above data and recommendations are given in good faith, on the basis of practical experience, but without warranty. The customer should carry out their own tests to confirm the suitability of the product for the application under consideration. Above technical data subject to tolerances up to 15%.

Safety data sheet must be read and understood before use.

Product benefits

• Protects glass from mortar, render or paint splatter
• Protects window and door profiles and fabricated components
• Translucent finish maximises light transmittance
• Easy application
• Easy removal
• 6 months UV resistance: If the product has been applied during late spring and summer then it is advised that the film be replaced every 3 months, as exposure during this time could make subsequent removal difficult due to high UV conditions.