fischer FBS II Ultracut Concrete Screwbolt CP US Hex Integral Washer

ULTRACUT FBS II CP:

The high-performance concrete screw for absolute installation ease.

The fischer concrete screw UltraCut FBS II US is a powerful anchoring solution with top installation comfort. The concrete screw with its pressed-on washer is ideal for slot fixations and the anchoring of wooden constructions as well as beams and sills. The European Technical Approval for cracked concrete and non-cracked concrete as well as for seismic loads and classification into fire resistance class R 120 guarantee even more safety. The saw tooth geometry enables a quick and easy installation. No drill hole cleaning is required for installation in ceilings and floors. The expansion-free anchorage system enables low edge and axial spacings.

• The innovative surface coating guarantees an additional protection (approved through salt spray test over 2.000h –with external test certificate).
• 
  The high quality of the coating from our FBS II CP is also proved by the external conducted Nordtest Method NT MAT 003-2002-05.
• 
  The special ratio between flank and shaft diameter allows a deep and fast cutting into the concrete.
• 
  The ETA-Assessment Option 1 guarantees for the usage in cracked-and non-cracked concrete for the highest safety requirements.
• 
  The concrete screw FBS II CP with an ETA-Assessment of the seismic category C1 & C2 for an additional safety-benefit in case of earthquakes.
• Salt Spray Test (NSS-Test after DIN EN ISO 9227)