Drop-in Product Information
Deformation controlled anchor available in zinc plated and yellow passivated finish. Suitable for use in non-cracked concrete between C20/25 & C50/60.
Features
1. Internal thread suitable for bolts or threaded studs
2. Permanent socket to allow removal and replacement of fixture
These anchors must be installed using JCP Drop-in Anchor Setting Tool M6
Drop-in Product Information
Deformation controlled anchor available in zinc plated and yellow passivated finish. Suitable for use in non-cracked concrete between C20/25 & C50/60.
Features
1. Internal thread suitable for bolts or threaded studs
2. Permanent socket to allow removal and replacement of fixture
These anchors must be installed with a JCP Drop-in Anchor Setting Tool M8
Drop-in Product Information
Deformation controlled anchor available in zinc plated and yellow passivated finish. Suitable for use in non-cracked concrete between C20/25 & C50/60.
Features
1. Internal thread suitable for bolts or threaded studs
2. Permanent socket to allow removal and replacement of fixture
These anchors must be installed with a JCP Drop-in Anchor Setting Tool M10
Drop-in Product Information
Deformation controlled anchor available in zinc plated and yellow passivated finish. Suitable for use in non-cracked concrete between C20/25 & C50/60.
Features
1. Internal thread suitable for bolts or threaded studs
2. Permanent socket to allow removal and replacement of fixture
These anchors must be installed with a JCP Drop-in Anchor Setting Tool M12
Drop-in Product Information
Deformation controlled anchor available in zinc plated and yellow passivated finish. Suitable for use in non-cracked concrete between C20/25 & C50/60.
Features
1. Internal thread suitable for bolts or threaded studs
2. Permanent socket to allow removal and replacement of fixture
These anchors must be installed with a drop-in anchor setting tool
Drop-in Product Information
Deformation controlled anchor available in zinc plated and yellow passivated finish. Suitable for use in non-cracked concrete between C20/25 & C50/60.
Features
1. Internal thread suitable for bolts or threaded studs
2. Permanent socket to allow removal and replacement of fixture
These anchors must be installed with a JCP Drop-in Anchor Setting Tool M20
Drop-in Product Information
Deformation controlled anchor available in zinc plated and yellow passivated finish. Suitable for use in non-cracked concrete between C20/25 & C50/60.
Features
1. Internal thread suitable for bolts or threaded studs
2. Permanent socket to allow removal and replacement of fixture
These anchors must be installed with a drop-in anchor setting tool
