Ejot DH Insulation Support Anchor Shaft Only 8mm

Applications

• For fixing thermal insulation to rear ventilated facades
• Suitable for blockwork, brickwork and concrete

Properties

• Manufactured from high grade polyethelene
• Innovative two part system creates set embedment depth
• Prevents sideways buckling of the shank
• Prevents quilting of insulation

Technical specifications

• Hammer in anchor
• Drill diameter: 8 mm
• Set embedment depth of 30mm
• Apply shank through insulation, or push insulation over shank
• Seperate washer face diameter is: 90 mm

Applications

• For fixing thermal insulation to rear ventilated facades
• Suitable for blockwork, brickwork and concrete

Properties

• Manufactured from high grade polyethelene
• Innovative two part system creates set embedment depth
• Prevents sideways buckling of the shank
• Prevents quilting of insulation

Technical specifications

• Hammer in anchor
• Drill diameter: 8 mm
• Set embedment depth of 30mm
• Apply shank through insulation, or push insulation over shank
• Seperate washer face diameter is: 90 mm

Applications

• For fixing thermal insulation to rear ventilated facades
• Suitable for blockwork, brickwork and concrete

Properties

• Manufactured from high grade polyethelene
• Innovative two part system creates set embedment depth
• Prevents sideways buckling of the shank
• Prevents quilting of insulation

Technical specifications

• Hammer in anchor
• Drill diameter: 8 mm
• Set embedment depth of 30mm
• Apply shank through insulation, or push insulation over shank
• Seperate washer face diameter is: 90 mm

• Applications

  • For fixing thermal insulation to rear ventilated facades
  • Suitable for blockwork, brickwork and concrete

• Properties

  • Manufactured from high grade polyethelene
  • Innovative two part system creates set embedment depth
  • Prevents sideways buckling of the shank
  • Prevents quilting of insulation

• Technical specifications

  • Hammer in anchor
  • Drill diameter: 8 mm
  • Set embedment depth of 30mm
  • Apply shank through insulation, or push insulation over shank
  • Seperate washer face diameter is: 90 mm

• Applications

  • For fixing thermal insulation to rear ventilated facades
  • Suitable for blockwork, brickwork and concrete

• Properties

  • Manufactured from high grade polyethelene
  • Innovative two part system creates set embedment depth
  • Prevents sideways buckling of the shank
  • Prevents quilting of insulation

• Technical specifications

  • Hammer in anchor
  • Drill diameter: 8 mm
  • Set embedment depth of 30mm
  • Apply shank through insulation, or push insulation over shank
  • Seperate washer face diameter is: 90 mm